SIP/RTP Examples

This section provides information about:

■   SIP/RTP Load Balancing Example
■   SIP/RTP Minimum Configuration Example

This is a load balancing configuration example of SIP/RTP.

1 SIP/RTP UDP/TCP Support

(missing or bad snippet) Refer to Access GigaSMART from GigaVUE-FM for details.

Configure ports

To configure a GigaSMART group and associate it with a GigaSMART engine port do the following.

1.   (missing or bad snippet)GigaSMART Groups.
2. Click New.
3. Type an alias in the Alias field and enter an engine port in the Port List field.

2 GigaSMART Group Port Info
4. Click Save.
5. Scroll drown the page to select SIP Port parameters.
6. Type parameters for SIP Port and RTP Port.
7. Enter parameters for SIP Session Timeout and the SIP TCP Idle Timeout.

3 SIP Port parameters
8. Click OK.

Create Virtual Ports

(missing or bad snippet) Refer to Access GigaSMART from GigaVUE-FM for details.

To create virtual ports, do the following:

1.   From the device view, select GigaSMART > Virtual Ports.
2. Click New.

4 Virtual Ports
3. Enter an alias in the Alias field to identify the virtual port.
4. In the GigaSMART Groups field, select the GigaSMART Group configured in Step 1: of Configure a GigaSMART Group.
5. Click Save.

Configure GigaSMART Operation

Define a GigaSMART operation to enable SIP Flow Sampling. If combining Flow Sampling with Load Balancing GSOPs, make sure that you select both operations when creating the GigaSMART Operation.

(missing or bad snippet) Refer to Access GigaSMART from GigaVUE-FM for details.

To configure the GigaSMART Operation, do the following:

1.   (missing or bad snippet)GigaSMART Operations (GSOP).
2. Click New. On the GigaSMART Operations page, do the following:

5 GigaSMART Operations page
3. In the Alias field, enter an alias to help identify this GSOP.
4. In the GigaSMART Groups field, select the GigaSMARTgroup configured in Step 1: Configure a GigaSMART Group.
5. In the GigaSMART Operations (GSOP) field, select Flow Samplingfor SIP.
6. Using the GSOP drop down list, select Load Balancing as the next GSOP operation.

6 GigaSMART Operations - Load Balancing

Options:

- Stateful

- Stateless

- Enhanced

7. Select Stateful.
8. For Type, select SIP as the stateful application within a group of GigaSMART operations.
9. Select Caller ID as the Load Balancing Method.
10. Click OK.

Create first level map

1.   (missing or bad snippet) from Traffic select Maps > Maps > Maps.
2. Click New.
3. Type map-level1 in the Alias field.
4. Select First Level for Type and By Rule for Subtype.
5. Select port 1/1/x1 for the Source.

7 Create New Map
6. Select virtual port vport1 for the Destination.
7. Click Adda Rule to add Rule 1
8. Click Save.

Create second level map for SIP Flow Sampling.

1.   (missing or bad snippet) from Traffic select Maps > Maps > Maps.
2. Click New.
3. Type an alias in the Alias field.
4. Select Second Level for Type and Flow Sample SIP for Subtype.
5. Select virtual port vport1 for the Source.
6. Select port group for the Destination.
7. Select the group from the GSOP list.
8. Click Add a Rule.
9. Select SIP for the condition.
10. Select any of the following options:
o   Caller ID-For example, enter 408* for Caller ID.
o   Caller ID Range
o   Callee ID
o   Callee ID Range
o   Caller/Callee ID Range

8 Create Second Level Map
11. Enter a percentage for amount the traffic you want to be affected by SIP flow sampling.
12. Click Add a Rule.
13. Select SIP for the condition
14. Enter 6501234* for Caller ID.
15. Enter a percentage for amount the traffic you want to be affected by SIP flow sampling.
16. Click OK.

Create the SIP whitelist

1.   (missing or bad snippet) Whitelist.
2. Click New.
3. Type an alias in the Alias field.
4. From the GigaSMART Groups drop-down list, select a .the GigaSMART group.
5. Load whitelist files from a specified location to populate the SIP whitelist.
a. On the SIP Whitelist page, select Bulk Upload.
b. Select Bulk Entry Operation for Upload Type
c. Select Upload from URL from the Bulk Upload Type list.
d. Enter the URL in the Enter Remote URL field.
6. Click OK.

Associate the GigaSMART group to the SIP whitelist.

1.   (missing or bad snippet)GigaSMART Groups > GigaSMART Groups.
2. Select the GigaSMART Group you previously created and click Edit.
3. From the GigaSMART Groups drop-down list, select a GigaSMART group previously created.
4. Under SIP Whitelist, click on the SIP Whitelist Alias field and select the alias previously created from the available list.
5. Click OK.

Configure GigaSMART operation for SIP whitelisting

1.   (missing or bad snippet)GigaSMART Operations > GigaSMART Operation.
2. Click New.
3. Type an alias in the Alias field.
4. Select the GigaSMART group created in task 1.
5. From the GigaSMART Operations (GSOP) drop-down list, select the following:
o   SIP Whitelist and select Enabled.
o   Load Balancing.
6. For Load Balancing, do the following:
a. Choose: Stateful
b. For Type select: SIP

7. Click OK.

Configure first level map

1.   (missing or bad snippet) from Traffic select Maps > Maps > Maps.
2. Click New.
3. Configure the map:
a. Enter an Alias
b. Type: First Level, Sub Type: By Rule
c. Source: 1/1/g2
d. Destination: vport
4. Click Add a Rule.
5. Click Save.

Create another second level map for SIP flow whitelist

1.   Select Maps > Maps > Maps.
2. Click New.
3. Configure the map:
a. Alias: alias name
b. Type: Second Level, Sub Type: Flow Whitelist SIP
c. Source: vport1
d. Destination: 1/2x23
e. Select from the GSOP list.
4. Click Add a Rule.
5. Select SIP. In SIP type, you can choose any of the following options:
o   Caller ID
o   Callee ID
o   Caller/Callee ID
o   Source IP
o   Destination IP
o   Source/Destination IP
o   All
6. Click OK.