Required Command-Line Mode = Configure

Use the spine-link command to configure spine links, which are part of the configuration of the leaf and spine architecture with multiple paths for achieving high availability in a cluster environment. Refer to the “Multi-Path Leaf and Spine” chapter in the GigaVUE Fabric Management Guide for details.

The spine-link command has the following syntax:

spine-link alias <alias>
   comment <comment>
   port-list <port-list>

The following table describes the arguments for the spine-link command:



alias <alias>

Specifies an alias for the spine link.

For example:

(config) # spine-link alias leaf1spine

comment <comment>

Adds a comment to a spine link. Comments can be up to 128 characters. Comments longer than one word must be enclosed in double quotation marks.

For example:

(config) # spine-link alias leaf1spine comment “Leaf 1 Spine”

port-list <port-list>

Specifies the list of stack GigaStream aliases in the spine link. Separate each alias with a comma.

For example:

(config) # spine-link alias leaf1spine port-list leaf1spine1gs,leaf1spine2gs

Related Commands

The following table summarizes other commands related to the spine-link command:



Displays all spine links.

# show spine-link

Displays a specific spine link.

# show leaf1spine

Displays all spine links.

# show spine-link all

Displays all spine links in table format.

# show spine-link brief

Deletes a specific spine link.

Note:  To delete a spine link, first delete the participating stack links.

(config) # no spine-link alias leaf1spine

Deletes all spine links. Type YES to confirm the deletion or type NO to cancel it.

(config) # no spine-link allEnter ‘YES’ to confirm this operation: