GigaSMART 5QI
In 5G traffic, 5QI values present in the control traffic and its associated Flow Identifiers (QFI) value are correlated and the data traffic is sent to the tools. 5QoS Flow Identifiers (QFI) identifies each QoS (Quality of Service) flows.
5QI sampling are performed based on the QoS flows instead of using other subscriber filtering parameters such as SUPI, PEI, GPSI, DNN
You can configure 5QI along with other filtering parameters such as SUPI, PEI, GPSI, DNN, NSAI.
Rules and Notes
Keep in mind the following rules and notes when you work with the 5G RAN Correlation feature:
- 5QI does not support whitelisting.
- Whitelisting can be performed based on SUPI.
Configure 5QI in 5G Flow Sampling
To configure 5QI in 5G Flow Sampling, follow these steps:
Task | Description | UI Steps | |
---|---|---|---|
1. |
Configure a GigaSMARTgroup and associate with a GigaSMART engine port. |
|
|
2. |
Create a virtual port. |
|
|
3. |
Configure three first level maps. |
|
|
4. |
Configure the GigaSMARToperation. |
|
|
5. |
Configure a second level map for 5G flow sampling map. The traffic flow is sampled based on the rules in this map. |
|
|