PRT-HC1-Q04X08 Module
The PRT-HC1-Q04X08 line card consists of four (4) 40Gb QSFP+ ports and eight (8) 1GB/10Gb SFP/SFP+ ports. This module increases the port density and allows GigaVUE-HC1 to connect with GigaVUE-TA Series and GigaVUE HC Series nodes with higher-speed (40Gb) links. It provides connectivity of 240 Gb with line rate on-board switching across the 40G/10G/1G ports.
Features
| 1. | All ports ,including breakout ports of this module, can be used as network ,tool, hybrid, circuit, inline network and tool ports. |
| 2. | The ports can be used for 10G/40G/4x10G stacking. |
| 3. | The module supports 4x10G breakout on the 40G ports using SR4 optics or PLR4/PSM4 optics |
| 4. | The breakout ports can be used in clustering and supports IP interface configuration for netflow and tunneling. The ports in the line card can be added as part of stack GigaStream as well. |
| 5. | This module is hot swappable. |
For details about the supported transceiver, cable type, fan-out, inline ports, and clusters, refer to GigaVUE-OS Compatibility and Interoperability Matrix.
Module LED
The LEDs on the modules indicate the current operational status. The operational states indicated by the color of Power (PWR) and Ready (RDY) LEDs are as described below.
|
LEDs |
Color |
Description |
|---|---|---|
|
PWR - Power LED |
Solid Green |
Indicates the module is receiving power |
|
RDY - Ready LED |
Solid Green |
Indicates normal condition |
|
Solid Red |
Indicates system booting or module down |
Port Status LED
The 40 GB Port LED Q1..Q4 and 1Gb/10Gb SFP/SFP+ LED states are as described below:
|
LED |
Color |
Description |
|---|---|---|
|
LED Q1….Q4 |
OFF |
Port is administratively disabled, or the link is down. |
|
Solid Green |
Link up |
|
|
Port LED X1…X8 |
OFF |
Port is administratively disabled, or the link is down. |
|
Solid Green |
Link up |
|
|
Activity LED |
N/A |
Unused |
