Displaying Ports

Use the show port command to display all ports in a table format. The output of the command is as follows:

 

(config) # show port

Use the show port params command to display port parameters. The output of the command on GigaVUE H Series nodes is as follows:

(config) # show port params port-list 11/3/x1

             Parameter          11/3/x1

 ======================  ===============

            Name Alias:                -

                  Type:          network

                 Admin:          enabled

           Link status:               up

        Auto Negotiate:              off

                Duplex:             full

          Speed (Mbps):            10000

                   MTU:             9400

         Force Link Up:              off

            Port Relay:              N/A

             Port Role:              N/A

      Ingress Vlan Tag:                -

       Egress Vlan Tag:             none

          Buffer Index:             high

             Discovery:              off

                   GDP:           enable

             Timestamp:                -

             Source-id:                -

              SFP type:          sfp+ sr

       SFP vendor name:  GIGAMON SFP-532

         SFP vendor PN:  GMON8571D3BCL-G

         SFP vendor SN:          AQP1LNY

 SFP Power (1-2) (dBm):            -2.77

 SFP Power (3-4) (dBm):         -      -

 SFP Power (5-6) (dBm):         -      -

 SFP Power (7-8) (dBm):         -      -

 SFP Power (9-10)(dBm):         -      -

   SFP Temperature (C):              N/A

 Alarm THld (H-L)(dBm):      0.00 -20.00

 Alert THld (H-L)(dBm):     -1.00 -18.01

     Power THld Status:           Normal

               Comment:                 

Note:  The output of the show port params command on GigaVUE TA Series nodes and the Certified Traffic Aggregation White Box do not have values for the power thresholds as follows:

(config) # show port params slot 8

...

 Alarm THld (H-L)(dBm):              N/A

 Alert THld (H-L)(dBm):              N/A

     Power THld Status:              N/A

               Comment:                 

Note:  The output of the show port params command on GigaVUE‑HC2, GigaVUE HD Series, GigaVUE-TA100, GigaVUE-TA100-CXP, GigaVUE‑HC3, or GigaVUE-TA200 and GigaVUE‑TA25 nodes equipped with 100Gb ports and QSFP28 transceivers, display an SFP temperature as follows:

(config) # show port params port-list 13/4/c1..c2

...

SFP type:        qsfp28 sr        qsfp28 sr

       SFP vendor name:          GIGAMON          GIGAMON

         SFP vendor PN:     FTLC9551REPM     FTLC9551REPM

         SFP vendor SN:          XU60DZN          XU60DZS

 SFP Power (1-2) (dBm):    -40.00 -40.00    -40.00 -40.00

 SFP Power (3-4) (dBm):    -40.00 -40.00    -40.00 -40.00

 SFP Power (5-6) (dBm):         -      -         -      -

 SFP Power (7-8) (dBm):         -      -         -      -

 SFP Power (9-10)(dBm):         -      -         -      -

 SFP Temperature (C):            20.94            21.12

...

Note:  The output of the show port params command on GigaVUE-TA100-CXP nodes equipped with 100Gb ports and CXP transceivers, display an SFP temperature as follows:

(config) # show port params port-list 1/1/c1

...

SFP type:           cxp sr

       SFP vendor name:          GIGAMON

         SFP vendor PN:    FTLD10CE3C-GM

         SFP vendor SN:          XWG0J50

 SFP Power (1-2) (dBm):    -40.00 -40.00

 SFP Power (3-4) (dBm):    -40.00 -40.00

 SFP Power (5-6) (dBm):    -40.00 -40.00

 SFP Power (7-8) (dBm):    -40.00 -40.00

 SFP Power (9-10)(dBm):    -40.00 -40.00

   SFP Temperature (C):            23.88