map-group

Required Command-Line Mode = Configure

Use the map-group command to create a group of maps for GTP forward list selective forwarding - forward (formerly whitelist)ing and GTP flow sampling. All the maps in a map group receive traffic according to map rules, rather than map priority. Thus, multiple copies of a GTP packet can be sent to more than one tool. This functionality is referred to as overlapping maps.

On the virtual port, a mode of gtp-overlap must be specified. Refer to vport.

The map-group command has the following syntax:

map-group alias <alias>
   comment <comment>
   map-list <list of maps>

The following table describes the arguments for the map-group command:

Argument

Description

alias <alias>

Specifies the name of the map group. The alias must be unique and can contain up to 128 characters. Aliases are case-sensitive.

For example:

(config) # map-group alias mg1

comment <comment>

Specifies a unique text string that describes the map group. Comments can be up to 128 characters. Comments longer than one word must be enclosed in double quotation marks.

For example:

(config) # map-group alias mg1 comment “Shared collector”

map-list <list of maps>

Specifies the maps in a list separated by commas.

For example:

(config) # map-group alias mg1 map-list lev2_fs1_4,lev2_fs2_4,lev2_fs3_4

NOTES:

A map group can be associated with only one GigaSMART group (gsgroup).
All maps in the map list have to be associated with the same gsgroup.
All maps within a map group must be connected to the same vport.
A map group can consist of only one GTP forward listing map or only one GTP flow sampling map but it cannot contain two maps of the same type.
Once a map group is created, it cannot be edited to change the type or subtype of the map. However, you can add and edit the map rules for a map while it is configured in a map group.
If multiple map groups are configured, the maps within each map group must point to the same port groups as the other map groups.

Related Commands

The following table summarizes other commands related to the map-group command:

Task

Command

Displays all map groups.

# show map-group

Displays information for a specified map group.

# show map-group alias mg1

Displays all map groups.

# show map-group all

Displays all map groups in table format.

# show map-group brief

Deletes a specified map group.

(config) # no map-group alias mg1

Deletes all map groups.

(config) # no map-group all