FlowVUE_Examples
This section contains:
Sample a Subset of Subscribers and Sample all Subscribers Traffic |
Sample a Subset of Subscribers and Sample a Subset of Traffic |
The following example samples on GTP-u traffic where 10% of the subscribers are forwarded.
Task |
Description |
UI Steps |
|||||||||||||||||||||||||||||||||||||||||||||
1 |
Configure one network and two tool type of ports. |
|
|||||||||||||||||||||||||||||||||||||||||||||
2 |
Configure a GigaSMART group and associate it with a GigaSMART engine port and configure sampling parameters |
|
|||||||||||||||||||||||||||||||||||||||||||||
3 |
Configure the GigaSMART operation and assign it to the GigaSMART group. |
|
|||||||||||||||||||||||||||||||||||||||||||||
4 |
Create an ingress (first level) map. Note: In the rule, 2152 is GTP-u traffic. |
|
FlowVUE can be used to reduce traffic to the monitoring tools. By combining FlowVUE with other GigaSMART applications such as APF, the traffic can be further reduced by filtering on specific Layer 4 application ports.
The following example samples on a subset of subscribers and forwards only the HTTP traffic related to the sampled subscriber set of devices.
Task |
Description |
UI Steps |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 |
Configure one network and two tool type of ports. |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 |
Configure a GigaSMART group and associate it with a GigaSMART engine port. |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 |
Configure the GigaSMART operation and assign it to the GigaSMART group. Also, configure APF. |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 |
Configure virtual port and associate it with the GigaSMART group. |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 |
Create a first level map and direct traffic to the virtual port. Note: In the rule, 2152 is GTP-u traffic. |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 |
Create a second level map and use the APF GigaSMART operation. APF performs filtering according to the gsrules, sending only matching traffic to the tool port. |
|