Configure MPLS Header Stripping

Before you configure MPLS header stripping, refer to MPLS Header Stripping – Rules and Notes.

The following table summarizes the required tasks to configure MPLS Header stripping to strip the incoming MPLS packets:

S.No	Task	Refer to..
1.	Configure the required MPLS labels at the chassis level.	Configure MPLS Labels on a Chassis
2.	Configure the required network or hybrid port.	Configure Ports
3.	Enable MPLS header stripping on the network or hybrid port that you configured in task 2.	Enable Header Stripping Protocol on Ports
4.	Configure a map. Keep in mind the following details when you configure a map: ● Ensure that you select the network or hybrid port on which you enabled MPLS header stripping as the source leader in a bidirectional clock relationship (formerly master) port of the map. ● Configure the map rules with the following parameters: o L2 parameters such as EtherType, MAC Destination, MAC Source, VLAN, or Inner VLAN. o MPLS payload parameters such as IP Version, IPv4 Destination, IPv4 Source, IPv6 Destination, IPv6 Source, Protocol, UDA1, or UDA2. For more details, refer to MPLS Header Stripping – Rules and Notes.	Create a New Map