GCB Reference

This section provides additional references useful for GCB.

Configure mTLS Authentication

Mutual TLS (mTLS) authentication or two-way authentication refers to the two parties (GigaVUE-FM & GCB, and Pcapper & GCB) authenticating each other at the same time in an authentication protocol. mTLS can protect against adversarial attacks and ensure information integrity.

GigaVUE-FM supports mTLS (basic authentication) using the username and password. Proper certificates need to be installed on both GigaVUE-FM and your environment, as default generated certificates will not work with mTLS.

Note: During GigaVUE-FM upgrade, the files only with the .crt or .key under /etc/pki/tls extensions will be retained.

Configure mTLS Authentication in GigaVUE-FM

Follow the below steps to configure mTLS authentication in GigaVUE-FM:

Log in to the GigaVUE-FM CLI.
Ensure that you have the following certificates and keys in the /home/User/certsAndKeys directory:
Note: The names of the certificates and keys are configurable and can be changed. You must make sure that you use the same names in the configurations that follow.
- fmServerCertificate.pem: public certificate file in PEM format to be used by GigaVUE-FM when acting as a server.
- fmServerCertificateKey.pem: private key file in PEM format to be used by GigaVUE-FM when acting as a server.
- fmServerCACertificate.pem: public certificate file in PEM format of the CA which issued the fmServerCertificate.pem to be used by GigaVUE-FM when acting as a server.
  Note: fmServerCACertificate.pem certificate needs to be imported into client's TrustStore, including browser if it is not issued by one of the trusted CAs.
- fmClientCertificate.pem: public certificate file in PEM format to be used by GigaVUE-FM when acting as a client.
- fmClientCertificateKey.pem: private key file in PEM format to be used by GigaVUE-FM when acting as a client.
- fmClientCACertificate.pem: public certificate file in PEM format of the CA which issued the fmClientCertificate.pem to be used by GigaVUE-FM when acting as a client.
Note: If the same certificate is used when GigaVUE-FM is a client and as a server, the three fmServer*.pem files will be the same as the three fmClient*.pem files.
Change to the directory where the above files are stored.
```
cd /home/User/certsAndKeys
```

Add fmClientCACertificate.pem to the GigaVUE-FM trust store:

sudo cp fmClientCACertificate.pem   /etc/pki/ca-trust/source/anchors/

sudo update-ca-trust extract

Install the certificates and private key to make GigaVUE-FM act as a server.
1. Backup the existing certificate and copy new FM certificate fmServerCertificate.pem.
```
sudo cp /etc/pki/tls/certs/localhost.crt /etc/pki/tls/certs/BACKUP_localhost.crt
```
```
sudo cp fmServerCertificate.pem /etc/pki/tls/certs/localhost.crt
```
2. Backup the existing private key and copy new GigaVUE-FM key fmServerCertificateKey.pem
```
sudo cp /etc/pki/tls/private/localhost.key /etc/pki/tls/private/BACKUP_localhost.key
```
```
sudo cp fmServerCertificateKey.pem /etc/pki/tls/private/localhost.key
```
  .
3. GigaVUE-FM uses a public key (cms.p12 file) to encrypt the Security Assertion Markup Language (SAML) messages. Since for mTLS to work, we need valid certificates installed in FM, generating a new public key using the following command:
```
sudo openssl pkcs12 -export -name CMS -out /etc/gigamon/cms.p12 \
```
```
-inkey /etc/pki/tls/private/localhost.key -in /etc/pki/tls/certs/localhost.crt -passout pass:cms123
```
Install the certificates and private key to make GigaVUE-FM act as a client.
1. Copy new client certificate fmClientCertificate.pem.
```
sudo cp fmClientCertificate.pem /etc/pki/tls/certs/fmClientCertificate.crt
```
2. Copy new client key fmClientCertificateKey.pem.
```
sudo cp fmClientCertificateKey.pem /etc/pki/tls/private/fmClientCertificateKey.key
```
3. Copy new client CA public certificate fmClientCACertificate.pem.
  Note: This certificate needs to be imported into GigaVUE-FM Trust Store.
```
sudo cp fmClientCACertificate.pem /etc/pki/tls/certs/fmClientCACertificate.crt
```

Generate KeyStore for GigaVUE-FM to act as a client

Create a client certificate chain file.

sudo cat /etc/pki/tls/certs/fmClientCACertificate.crt \

	/etc/pki/tls/certs/fmClientCertificate.crt \

	/etc/pki/tls/private/fmClientCertificateKey.key | sudo tee /etc/pki/tls/certs/fmClient.chain.crt > /dev/null

Create a client certificate chain file in PKCS12 format.

sudo openssl pkcs12 -export -in /etc/pki/tls/certs/fmClient.chain.crt \

-out /etc/pki/tls/certs/fmClient.chain.p12 \

-passout pass:changeit

Create Java keystore

sudo keytool -importkeystore -srckeystore /etc/pki/tls/certs/fmClient.chain.p12 \

-srcstoretype pkcs12 \

-destkeystore /etc/pki/tls/certs/fmClientJKS.crt \

-storepass changeit

Make the keystore readable.

sudo chmod 644/etc/pki/tls/certs/fmClientJKS.crt

Restart Apache Web Server.
```
sudo systemctl restart httpd
```

Restart the GigaVUE-FM.

sudo systemctl restart tomcat@cms.service

GigaVUE-FM is not responsible for any PKI or certificate management activities.

Configure mTLS Authentication in GCB

Follow the below steps to configure mTLS authentication in GCB:

Note: Before you begin, you must generate the ca_cert.pem, gcb_cert.pem and gcb_key.pemcertificates for FM-GCB mTLS configuration.

Copy the generated ca_cert.pem, gcb_cert.pem and gcb_key.pem certificates that you generated, to a folder.

Create a secret using mTLS for GCB in Kubernetes by using the below command and giving respective path to each file:

kubectl create secret generic <secret-name> --from-file=gcb-ca-root-cert=<path to file> --from-file=gcb_cert=<path to file> --from-file=gcb-pvt-key=<path to file>

Use the above created secret in the following snippet from gcb-cntlr YAML file.

- mountPath: /etc/gcbcerts

mountPropagation: None

name: gcb-tls

volumes:

- name: gcb-tls

secret:

secretName: gcb-tls