SMT-HC1-S (Gen 3 GigaSMART Card)

GigaVUE-HC1 now supports an additional module called the Generation 3 GigaSMART card (SMT-HC1-S), which gives 80Gb throughput and can be used to provide the ThreatINSIGHT solution for security detection. Integrate this module with Threat Detection and Response functionality on GigaVUE-HC1 using GigaVUE-FM to enable faster provisioning and easier maintenance. For more information, refer to Gigamon ThreatInsight Sensor, online or 'Threat Detection and Response' from GigaVUE-FM User’s Guide. There are no front end ports on this module. 

      

Generation 3 GigaSMART Card (SMT-HC1-S)

Maximum Modules Per Chassis

The maximum SMT-HC1-S number of modules per chassis is two. 

Power LED (PWR)

The LED indicates the operational status of the module as follows :

• OFF means the module is not powered up.
• GREEN means the module is powered on.

Ready LED (RDY)

The LED indicates the operational status of the module as follows :

• OFF means the module is inserted but not yet configured.
• RED means the module is failed.
• GREEN means the module is ready.

H/S LED

The LED indicates the operational status of the module as follows :

• OFF means the module is in normal operation.
• BLUE means the module is ready to be removed when, the card is shut-down or not configured. LED turns on at insertion of module.

Hot Swap Button

Not supported in this module at this time.

The addition of Threat Detection and Sensor image to GigaVUE‑HC1increases the size of the downloaded file. This causes failure in extraction of the expanded image on the target. To install the new image follow the instructions provided below:

• Upgrading from an older software version to 5.10.01 is not supported.
• Upgrade to the latest software version 5.10.00 before you upgrade to 5.10.01.