Ensure that you complete the following prerequisites before you start with Gigamon ThreatInsight Sensor deployment:

•

Upgrade your GigaVUE-FM instance to v5.10 or above.

•

Add the GigaVUE-HC1 device that has the SMT-HC1-S module installed. For instructions, refer to Add New Physical Node or Cluster to GigaVUE-FM.

•

Generate a provision code from the Gigamon ThreatINSIGHT Customer Portal to validate your Gigamon ThreatINSIGHT integration. The provision code that you generate is valid for 24 hours. For instructions, refer to the "Generate a Registration Code" section in the ThreatINSIGHT Portal Guides. To access the Portal Guides, log in to Gigamon ThreatINSIGHT, and then go to Help > Portal Guides.

•

Ensure that the GigaSMART engine port on which you want to deploy the ThreatINSIGHT sensor has internet connectivity so that the ThreatINSIGHT sensor can connect to AWS.

To configure the network access:

a.

From the device view, go to Ports > Ports > All Ports.

b.

Select the engine port and then click Edit.

c.

You can either manually assign the IP address or select the Enable DHCP check box to dynamically assign the IP address and other network configuration parameters.

d.

Select eth2 as the interface, and then click OK.