Create Tunnel Endpoints

The customized traffic from the GigaVUE V Series node is distributed to the tunnel endpoints using a standard L2 Generic Routing Encapsulation (GRE) or Virtual Extensible LAN (VXLAN) tunnel.

To create the tunnel endpoints:

  1. In GigaVUE-FM, on the top navigation bar, select Cloud.
  2. On the left navigation pane, select AnyCloud > Settings > Tunnel Spec Library.
  3. Click New. The Add Tunnel page appears.
  4. Select or enter the appropriate information as described in the following table.

    Field

    Description

    Alias

    The name of the tunnel endpoint.

    Note:  Do not enter spaces in the alias name.

    Description

    The description of the tunnel endpoint.

    Type

    The type of the tunnel.

    Select L2GRE or VXLAN to create a tunnel. If you choose VXLAN, you must enter the remote tunnel port.

    Traffic Direction

    The direction of the traffic flowing through the GigaVUE V Series node.

    Choose Out for creating a tunnel from the GigaVUE V Series node to the destination endpoint.

    Note:  Traffic Direction In is not supported in the current release.

    Remote Tunnel IP

    The IP address of the tunnel destination endpoint.

    Note:  You cannot create two tunnels from a GigaVUE V Series node to the same IP address.

    Remote Tunnel Port

    Port number for the tunnel end point.

  5. Click Save. The tunnel endpoints are added successfully.